Winyao

Winyao E5709T Dual-Port Server Adapter

Winyao E5709T network card adapter is based on the Broadcom BCM5709C Ethernet controller and features a PCI-E x1 design with onboard two RJ45 ports. All ports support auto-negotiation 10/100/1000Mbps speeds and deliver full line-rate Gigabit network connectivity.

The adapter is for edge computers, industrial automation, and machine vision (industrial camera) scenarios. It is suitable for multi-uplink, link aggregation, and failover of edge computing gateways and edge servers; dual-network isolation and redundant networking of industrial-site PLC/IPC and control networks such as Modbus-TCP, EtherNet/IP, and EtherCAT; and parallel image capture and visual inspection of multiple GigE Vision industrial cameras. The on-chip TCP processing engine and iSCSI offload significantly reduce host CPU utilization, providing high-throughput, low-latency Gigabit connectivity for industrial PCs, embedded platforms, and servers.

Key Common Features

  • Uses the Broadcom NetXtreme II BCM5709C converged network controller
  • Dual-port single-chip solution, suitable for Network Interface Card (NIC) and LAN-on-Motherboard (LOM) designs
  • PCI Express x1 interface, compatible with PCIe v2.0
  • 2 RJ45 copper ports
  • Supports 10/100/1000 Mb/s auto-negotiation
  • Dual-port Gigabit TOE (TCP/IP Offload Engine) solution with integrated TCP processing engine
  • Integrated iSCSI controller (iSCSI initiator) and RDMA controller (RNIC, supports iWARP / RDMAC 1.0); can run RDMA, iSCSI HBA, and TOE concurrently
  • Supports 9 KB jumbo frames
  • Supports IEEE 802.3x flow control and IEEE 802.1Q VLAN tagging
  • Supports NIC teaming for link aggregation, load balancing, and failover: 802.3ad LACP, Generic Trunking (GEC / FEC), and heterogeneous teaming
  • Supports NC-SI (Network Controller Sideband Interface) and IPMI management pass-through
  • Supports PXE 2.0 remote boot, iSCSI boot, and Wake-on-LAN
  • Supports statistics gathering (SNMP MIB II, Ethernet-like MIB, 802.3x Clause 30 MIB) and JTAG boundary scan

Performance Features

  • Compliant with IEEE 802.3 / 802.3u / 802.3ab and supports auto-negotiation
  • TCP processing engine supports full fast-path TCP processing, compatible with IPv4 and IPv6; both ports support TOE
  • Supports Receive Side Scaling (RSS) to distribute packet receive processing across multiple processor cores
  • Supports TCP / IP checksum offload and TCP Segmentation Offload (TSO)
  • Supports RDMA hardware-based data placement directly into application buffers without CPU intervention (user mode and kernel mode)
  • Accelerates IP storage: reduces CPU utilization for file-level storage protocols such as CIFS and NFS
  • Supports adaptive interrupts to reduce system overhead for network processing
  • Supports Message Signaled Interrupts (MSI) and MSI-X, allowing interrupt distribution in multi-CPU hosts
  • PCI Express host interface provides low-latency access to CPU and memory resources
  • Supports interrupt coalescing
Broadcom BCM5709C
Product Overview
Main Controller: Broadcom BCM5709C
Bus Interface: PCI Express v2.0 x1
Ports: RJ45 × 2
Speed: 10/100/1000 Mb/s Auto-Negotiation
Supported Standards: IEEE 802.3 / 802.3u / 802.3ab / 802.3x / 802.3ad / 802.1Q / 802.3 Auto
Supported Cable: 1000BASE-T: Cat5e or higher
Bracket: Metal bracket: Full height / Low profile
PCB Size (mm): Approx. 115 * 69 mm
Weight (G.W): Approx. 80g
Power Consumption: Approx. 3.0W
Temperature: Operating 0°C ~ 70°C / Storage -40°C ~ +85°C
Key Features
TCP/IP Offload Engine (TOE): ?Hardware-level full TCP/IP offload (IPv4/IPv6), supported on Windows + SNP, greatly reduces CPU utilization
Checksum Offload: ?TCP/IP/UDP checksum offload + SCTP checksum offload
Jumbo Frame: ?Supports 9 KB Jumbo Frame
Interrupts and Multi-Core Scaling: ?MSI-X + RSS multi-core load balancing; adaptive interrupts + interrupt coalescing
TCP Segmentation Offload (TSO): ?TCP/UDP TSO + TSO interleaving
iSCSI / RDMA: ?Hardware iSCSI HBA (license required) + RDMA/RNIC (iWARP) + TOE combined
VLAN and Flow Control: ?802.1Q VLAN + 802.1p QoS + 802.3x flow control + SNMP statistics
Link Aggregation and Redundancy: ?802.3ad LACP + Teaming/Failover + Smart Load Balancing
Management Features: ?NC-SI + SMBus + IPMI pass-through + ASF + ACPI 1.1a
Wake and Boot: ?Wake on LAN + PXE 2.0 remote boot + ACPI power management
Broadcom Advanced Control Suite (BACS) Software
BACS 3 Management Software: Adapter diagnostics, VLAN and Teaming/Failover, link aggregation configuration
Operating Systems Support
Operating system supportWindows Server 2003/2008/2008 R2/2012/2012 R2 (TOE on Windows Server family only)
Windows 7/8/8.1/10 (32/64bit)
Linux
FreeBSD & VMware ESX/ESXi
|
标题 OS 操作
{{ item.title }}
{{ item.version ? ('' + item.version) : 'NA' }}{{ item.fileSize || 'NA' }}
{{ item.os }}