Winyao WY5719T4 Quad-Port Server Adapter
Winyao WY5719T4 network card adapter is based on the Broadcom BCM5719 Ethernet controller and features a PCI-E x4 design with onboard four RJ45 ports. All ports support auto-negotiation 10/100/1000Mbps speeds and deliver full line-rate Gigabit network connectivity.
The adapter is for edge computers, industrial automation, and machine vision (industrial camera) scenarios. It is suitable for multi-uplink, link aggregation, and failover of edge computing gateways and edge servers; multi-network isolation and redundant networking of industrial-site PLC/IPC and control networks such as Modbus-TCP, EtherNet/IP, and EtherCAT; and parallel image capture and visual inspection of multiple GigE Vision industrial cameras. The quad-port card enables high-density networking in one slot, IEEE 1588 hardware timestamping ensures precise synchronization across multiple devices, Energy Efficient Ethernet (EEE) and the on-chip switching regulator controller reduce system power consumption, and the adapter provides high-reliability, low-power Gigabit connectivity for industrial PCs and embedded platforms.
Key Common Features
- Uses the Broadcom BCM5719 Gigabit Ethernet controller
- PCI Express x4 (5 GT/s)
- Provides 4 RJ45 copper ports
- Supports 10/100/1000 Mb/s full duplex and half duplex, with automatic MDI crossover
- Supports IEEE 802.3ap Clause 73 auto-negotiation and IEEE 802.3x flow control
- Supports jumbo frames with a maximum payload of 9600 bytes
- Supports IEEE 802.1Q VLAN tagging and link aggregation (802.3ad / 802.1AX) load balancing
- Supports hardware assist for IEEE 1588 and IEEE 802.1AS time synchronization
- Supports IEEE 802.3az-2010 Energy Efficient Ethernet (EEE), Central Power Management Unit (CPMU), power management offload, and ACPI power management
- Supports NC-SI (Network Controller Sideband Interface); integrates on-chip packet buffer memory
- Supports Wake-on-LAN, PXE remote boot, and iSCSI remote boot
- Supports statistics for SNMP MIB II, Ethernet-like MIB, and Ethernet MIB (IEEE 802.3z Clause 30)
Performance Features
- Compliant with IEEE 802.3 / 802.3u / 802.3ab; all four ports support full line-rate forwarding
- 17 receive queues and 16 transmit queues per port; supports I/O Virtualization (IOV)
- Supports VMware NetQueue and Microsoft VMQ virtual machine queue technologies
- Supports Receive Side Scaling (RSS), including UDP RSS hash types, to distribute data flows across multiple processor cores
- Supports Transmit Side Scaling (TSS) and multiple transmit queues to improve multi-core system throughput
- Supports MSI and MSI-X message signaled interrupts; up to 17 MSI-X vectors, with flexible per-queue interrupt reporting and queue-to-vector association
- Supports TCP / IP / UDP checksum offload (IPv4 / IPv6)
- Supports Large Send Offload (LSO) and TCP Segmentation Offload (TSO)
| Product Overview | |
| Main Controller: | Broadcom BCM5719A1 |
| Bus Interface: | PCI Express v2.1 (5.0 GT/s) x4 |
| Ports: | RJ45 × 4 |
| Speed: | 10/100/1000 Mb/s Auto-Negotiation |
| Supported Standards: | IEEE 802.3 / 802.3u / 802.3ab / 802.3ap / 802.3x / 802.1Q / 802.3az / 802.3 Auto |
| Supported Cable: | 1000BASE-T: Cat5e or higher |
| Bracket: | Metal bracket: Full height / Low profile |
| PCB Size (mm): | Approx. 119 * 69 mm |
| Weight (G.W): | Approx. 95g |
| Power Consumption: | Approx. 5.78W |
| Temperature: | Operating 0°C ~ 55°C / Storage -40°C ~ +85°C |
| Key Features | |
| Packet Buffers and Queues: ? | 17 Rx + 16 Tx queues per port; 17 MSI-X vectors with flexible vector-to-queue association |
| Checksum Offload: ? | TCP / IP / UDP checksum offload (IPv4 and IPv6) |
| Jumbo Frame: ? | Supports jumbo frames up to 9600 bytes |
| Interrupts and Multi-Core Scaling: ? | MSI-X + RSS / TSS; UDP RSS hash, multi-core load balancing |
| TCP Segmentation Offload (TSO): ? | Supports LSO / TSO (TCP segmentation offload) |
| Time Synchronization: ? | Hardware-assisted IEEE 1588v2 and IEEE 802.1AS time synchronization |
| VLAN and Flow Control: ? | VLAN tagging + 802.3x flow control + 802.3ad/802.1AX link aggregation + Auto MDI-X |
| I/O Virtualization: ? | Independent PCIe Function per port; VMware NetQueue + Microsoft VMQ |
| Management Features: ? | NC-SI + SMBus 2.0 + TruManage; SNMP statistics, IPMI out-of-band management |
| Power Saving and Remote Boot: ? | EEE (802.3az) + ACPI power saving; WoL + PXE (BIOS/UEFI) + iSCSI Boot |
| Broadcom Advanced Control Suite (BACS) Software | |
| Broadcom BACS Management Suite: | Diagnostics, advanced configuration, VLAN, Teaming (requires BACS/ANS), WMI and BBMAPI management |
| Operating Systems Support | |
| Operating system support | Windows Server 2008 R2 / 2012 / 2012 R2 / 2016 / 2019 / 2022 Windows 7/8/8.1/10/11 (32/64bit) Linux (tg3 / in-kernel support; RHEL / CentOS / SLES / Ubuntu / Debian etc.) VMware ESXi / ESX, Citrix XenServer, Oracle Solaris, FreeBSD |