Winyao I226T-M2-C Network Atapter
Winyao I226T-M2-C network card adapter is based on the Intel I226V Ethernet controller and features a M2 (Key A+E) design with onboard one RJ45 ports. All ports support auto-negotiation 2.5GbE/1GbE/100Mb speeds and deliver full line-rate 2.5GbE network connectivity.
The adapter is for small / compact industrial PC expansion, and is a high-speed 2.5GbE solution for NAS, switches, home or corporate network file backup acceleration, and industrial applications. With strong support for data acquisition and remote management in embedded devices, it supports 2.5GBASE-T, VLAN, WoL and PXE remote boot, and is a cost-effective 2.5Gigabit network card.
Key Features
- Intel I226-V 2.5GbE Ethernet controller
- M.2 2230 A+E Key interface
- RJ45 port with integrated MAC plus BASE-T PHY
- Multi-speed auto-negotiation: 2.5G / 1G / 100M
- 10/100 Mbps half/full-duplex and 1000/2500 Mbps full-duplex operation
- Up to 9 KB jumbo frames
- Auto-negotiation with automatic MDI/MDI-X crossover detection
- Wake-on-LAN (Magic Packet and Microsoft Wake-Up Frame)
- IEEE 1588 hardware time stamping, Linux in-kernel igc driver
Standards & Protocols
- IEEE 802.3 / 802.3u / 802.3ab / 802.3bz (2500BASE-T)
- IEEE 802.1Q VLAN tagging
- IEEE 802.1p Quality of Service (priority tagging)
- IEEE 802.3x and IEEE 802.3z full-duplex flow control
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- IEEE 802.1AS-rev time synchronization (Linux only; I226-V SKU)
- IEEE 802.1Qav and 802.1Qbv Forwarding and Queuing Enhancements for Time-Sensitive Streams (Linux only; full TSN capability available on I226-LM/IT SKUs)
- PCI Express 3.1 (5 GT/s), Gen2 x1 with LTR and L1 low-power states
- DMA coalescing for reduced host interrupt overhead
- TCP/UDP/IP checksum offload and segmentation offload (TSO/LSO)
| Product Overview | |
| Main Controller | Intel I226-V |
| Bus Interface | M2 (Key A+E) |
| Ports | RJ45 x1 |
| Speed | 10/100/1000/2500 Mbps |
| Supported Standards | IEEE 802.3 / 802.3u / 802.3ab / 802.3bz / 802.3x / 802.3z / 802.3az / 802.3 Auto-Negotiation |
| Supported Cable | Cat 5e UTP cable, max 100m for 1000BASE-T; approx. 100m for 2.5GBASE-T |
| Bracket: | COM port fixed bracket |
| PCB Size (mm): | Approx. 22 x 30 mm |
| Weight (G.W) | Approx. 54g |
| Power Consumption | Approx. 1.3 W |
| Temperature | 0°C ~ 55°C ; Storage -40°C ~ 85°C |
| Key Features | |
| Checksum Offload ? | IPv4/IPv6 TCP/UDP checksum offload + Rx/Tx + TSO v2 up to 256KB + LSO / Giant Send |
| Buffer Protection ? | Hardware CRC + ECC buffer protection, on-chip Tx/Rx packet buffers |
| Jumbo Frames ? | Supports Jumbo Frames up to 9.5KB |
| Interrupt Scaling / RSS ? | 4 Tx + 4 Rx queues + RSS (I226 supports) + MSI / MSI-X interrupt balancing |
| Precision Time Sync ? | IEEE 1588v1/v2 hardware timestamping (PTP) on Linux; 802.1AS-rev NOT supported on I226-V |
| AVB / TSN ? | 802.1Qav + 802.1Qbv + 802.1Qbu + 802.3br TSN/AV on Linux; 802.1AS-rev NOT supported on I226-V |
| Power Management ? | EEE 802.3az (2.5G/1G/100M) + PCIe L1.1/L1.2 + ACPI; NC-SI NOT supported |
| Remote Boot ? | WoL + Magic Packet + Wake-Up Frame + protocol offload (ARP/NS) + PXE 2.1 + UEFI + iSCSI Boot |
| Link Aggregation ? | 802.3x flow control + 802.1Q VLAN + 802.1p priority; Teaming via OS stack / bonding |
| Intel PROSet | |
| Intel PROSet | Advanced interrupt logic, VLAN, Teaming |
| Operating Systems Support | |
| Operating system support | Windows 11 / 10 32/64bit Linux igc driver kernel 5.16+ including RHEL / Ubuntu etc. FreeBSD VMware ESXi UEFI / UNDI PXE 2.1 supported |