Winyao WYI225T4 Quad-Port Server Adapter
Winyao WYI225T4 network card adapter is based on the Intel I225V3 Ethernet controller and features a PCI-E x4 design with onboard four RJ45 ports. All ports support auto-negotiation 2.5GbE/1GbE/100Mb speeds and deliver full line-rate 2.5GbE network connectivity.
This adapter is for edge computers, industrial automation, and machine vision (industrial camera) scenarios. It is suitable for multi-port 2.5G uplink, link redundancy, and traffic distribution on edge computing gateways and edge nodes; multi-network isolation and real-time communication for industrial-field PLC/IPC and control networks such as Modbus-TCP, EtherNet/IP, and EtherCAT; and parallel image capture and visual inspection with multiple GigE Vision industrial cameras. Bandwidth at 2.5 times Gigabit easily handles multiple streams of HD vision data, remains backward compatible with existing CAT5e cabling, and—combined with low power consumption and a small form factor—is suitable for long-term stable operation in industrial PCs and embedded platforms.
Common Key Features
- Onboard with four Intel Ethernet Controllers I225-V (revision v3)
- Each controller provides one PCI Express 3.1 x1 link (5 GT/s, Gen2 rate), aggregated to the upstream interface through a PCIe switch/bridge
- Each port integrates MAC and PHY on-chip, providing 4 RJ45 copper ports
- Supports multi-rate 2.5G / 1G / 100M / 10M
- Supports full-duplex at all rates, 10BASE-Te and 100BASE-TX half-duplex (with carrier extension), automatic polarity correction, and auto MDI/MDI-X
- Compliant with IEEE 802.3bz, IEEE 802.3ab, IEEE 802.3u, and IEEE 802.3; supports IEEE 802.3u auto-negotiation
- Supports IEEE 802.3x and 802.3z flow control; receive thresholds and transmit pause frames are software-configurable
- Supports Jumbo Frames up to 9 KB
- Supports IEEE 802.1Q VLAN tagging and IEEE 802.1p Layer 2 priority encoding
- Supports IEEE 1588 precision time synchronization (Intel officially notes Linux environment only)
- Supports IEEE 802.1Qav and 802.1Qbv time-sensitive traffic scheduling (Intel officially notes Linux environment only)
- Supports IEEE 802.3az Energy Efficient Ethernet (EEE) at 2500BASE-T / 1000BASE-T / 100BASE-TX rates
Performance Features
- 4 transmit queues and 4 receive queues per port, combined with RSS and MSI-X to reduce CPU usage on multicore systems
- Supports MSI and MSI-X message signaled interrupts; up to 5 dynamically allocated MSI-X vectors per port
- Supports interrupt throttling control and low-latency interrupts (can bypass automatic interval adjustment based on data sensitivity)
- Supports TCP/UDP and IPv4 checksum offload (transmit and receive), and extended transmit descriptors
- Supports TCP Segmentation Offload (TSO) for IPv4 / IPv6 to improve throughput and reduce processor load
- Supports scalable I/O in Linux (IPv4 / IPv6 / TCP / UDP) to improve network processing performance on multiprocessor systems
- Transmit and receive descriptor rings are managed by hardware to optimize system memory and PCIe bandwidth usage
- Integrates on-chip switched voltage regulator (iSVR) and MDI termination resistors to simplify power design and reduce external components
- Supports Smart Speed, automatically lowering the link rate when line quality is poor to maintain link stability
| Product Overview | |
| Main Controller: | Intel I225-V3 |
| Bus Interface: | PCI Express v3.1 (5 GT/s) x1 |
| Ports: | RJ45 × 4 |
| Speed: | 10/100/1000/2500 Mb/s Auto-Negotiation |
| Supported Standards: | IEEE 802.3u / 802.3ab / 802.3bz / 802.3x / 802.1Q / 802.3az / 802.3 Auto |
| Supported Cable: | Cat5 or higher; 1000BASE-T / 2500BASE-T |
| Bracket: | Metal bracket: Full height / Low profile |
| PCB Size (mm): | Approx. 130 * 69 mm |
| Weight (G.W): | Approx. 105g |
| Power Consumption: | Approx. 4.2W |
| Temperature: | Operating 0°C ~ 55°C / Storage -40°C ~ +85°C |
| Key Features | |
| Packet Buffers and Queues: ? | 4 Tx + 4 Rx queues per device; 40KB packet buffer; interrupt coalescing and low-latency interrupts |
| Checksum Offload: ? | Tx/Rx IPv4, IPv6, TCP, UDP, SCTP checksum offload + fragmented UDP reassembly |
| Jumbo Frame: ? | Supports 9.5KB Jumbo Frame |
| Interrupts and Multi-Core Scaling: ? | MSI-X + RSS (up to 4 queues); supports interrupt moderation and low-latency interrupts |
| TCP Segmentation Offload (TSO): ? | TSO v2 (TCP/UDP, IPv4/IPv6), max approx. 256KB |
| VLAN and Flow Control: ? | 802.1Q VLAN + 802.3x flow control + 802.1p QoS; Auto MDI-X |
| Power Saving and Power Management: ? | 802.3az EEE + ASPM + ACPI D0/D3 + Proxy / network proxy offload |
| Precision Time Protocol (PTP): ? | IEEE 1588v2 hardware timestamping (supported under Linux) |
| Wake on LAN and Boot: ? | Wake on LAN + EFI PXE remote boot; 32 Flexible Filters |
| Intel PROSet Software | |
| Intel PROSet: | Adapter diagnostics, advanced configuration, performance monitoring |
| Operating Systems Support | |
| Operating system support | Windows 10 / Windows 11 Linux: in-tree igc driver FreeBSD / VMware ESXi (requires corresponding driver support) |