Winyao WY6105FX Network Atapter
Winyao WY6105FX network card adapter is based on the VIA VT6105 Ethernet controller and features a PCI 32Bit design with onboard one SC interface. All ports support 100Mbps speeds and deliver full line-rate 100FX network connectivity.
The adapter is for traditional industrial remote device sites such as PLC locations, VFD drives, serial-to-Ethernet gateways, and remote RTU nodes, where copper cabling cannot meet the distance requirement, this 100M optical link provides a stable and reliable connection instead of copper media.
Key Features
- VIA VT6105M Chipset
- Standard 32-bit PCI 2.2 interface
- SC 100BASE-FX optical interface
- Optional transceiver modules: 2 km multimode version and 20 km single-mode version
- Provides 12 MIB link-status counters per port
- Supports EEPROM for MAC address storage
Standards & Features
- Efficient PCI bus mastering through VIA Rhine CSR definition
- Supports priority queuing with up to 8 priority levels
- Supports TCP / UDP checksum offload to reduce CPU usage
- Supports physical, broadcast, and multicast address filtering
- Supports IEEE 802.1Q VLAN; can insert/remove VLAN tags and filter by VLAN ID
- Supports Wake-on-LAN (WOL) per PCI power-management specification
| Product Overview | |
| Main Controller | VIA VT6105M |
| Bus Interface | PCI 2.2 32-bit |
| Ports | SC 100BASE-FX |
| Supported Standards | 802.3 / 802.3u / |
| Supported Cable | Optical module: 62.5/125 µm or 50/125 µm multimode fiber, 1300 nm |
| Bracket: | Full height / Low profile |
| PCB Size (mm) | Approx. 120 × 53 mm |
| Weight (G.W) | |
| Power Consumption | Approx. 2.3W at 100Mbps link |
| Temperature | Operating 0°C ~ 50°C / Storage -40°C ~ 80°C |
| Key Features | |
| Descriptor and DMA Buffers ? | Tx/Rx DMA + FIFO buffering reduces CPU load; 8 priority transmit queues; 802.1p |
| Checksum Offload ? | IPv4 IP header checksum offload; TCP/UDP checksum offload |
| Duplex and Auto-Negotiation ? | 10/100 Mbps half/full duplex, 802.3u N-Way auto-negotiation, Auto MDI/MDIX |
| Flow Control ? | IEEE 802.3x PAUSE (full duplex) + Jam (half duplex) |
| Power Management / Wake ? | ACPI + PCI PM + WoL (Magic Packet / link change / unicast / MS-defined pattern) |
| VLAN and Priority ? | 802.1Q VLAN long frames + tag insert/remove + VLAN ID filter + 802.1p 8 priority queues |
| Management ? | WfM 2.0 + DMI 2.0 + 12 sets of 16-bit hardware MIB counters |
| Boot / Configuration ? | EEPROM / Boot ROM config, RPL + PXE remote boot |
| SFF Optical Port ? | 100BASE-FX SC module, Force Fiber Mode, 1300nm multimode fiber |
| VIA Rhine Management Software | |
| VIA Rhine Software | VIA Rhine Family management driver / DIAG utility; Boot ROM configuration, WoL and diagnostic functions |
| Operating Systems Support | |
| Operating system support | MS-DOS Windows 95/98/Me Windows NT 4.0 / 2000 / XP / Server 2003 Windows Vista / 7 (32 & 64-bit) Linux via-rhine / rhinefet kernel 2.2.x / 2.4.x / 2.6.x FreeBSD vr / NetWare |