Winyao WY545DF Network Atapter
Winyao WY545DF network card adapter is based on the Intel 82545 Ethernet controller and features a PCI 32Bit design with onboard one SFP Cage. All ports support 1000Mbps speeds and deliver full line-rate Gigabit network connectivity.
The adapter is for traditional industrial remote device sites such as PLC locations, industrial switches, remote substations, and FTTD fiber-to-the-desk deployments, where copper cabling cannot meet distance requirements, this card uses a stable Gigabit optical link to replace copper media.
Key Features
- Intel 82545 controller
- 1000BASE-X SFP optical interface, supports 1000BASE-SX / LX modules
- SerDes supports 1000BASE-X per IEEE 802.3z, direct connect to SFP
- 32/64-bit PCI 2.2 / 2.3 and PCI-X 1.0a host interface
- Supports 64-bit addressing, capable of 4GB memory access
- Efficient PCI Bus Master, supports client read prefetch up to 64 bytes
- 64KB transmit/receive FIFO buffer, default 48KB / 16KB
Standards & Features
- Compliant with IEEE 802.3 / 802.3u / 802.3z / 802.3ab / 802.3x standards
- Supports IEEE 802.1Q VLAN tagging/untagging/filtering by VLAN ID, 4096 tags
- Checksum offload for IPv4 TCP/UDP, TCP segmentation (TSO) offload
- Advanced filtering: 16 perfect match addresses, 4096-bit multicast hash, promiscuous mode
- 128-bit internal bus transmit arbitration, hardware interrupt mitigation reduces PCI bus utilization
- Supports SNMP and RMON statistics
- Supports SMBus sideband interface for IPMI and ASF 1.0 alert
| Product Overview | |
| Main Controller: | Intel 82545GM |
| Bus Interface: | PCI 2.3 (32/64-bit, 33/66 MHz) |
| Ports: | SFP × 1 |
| Speed: | SFP port supports 1000 Mb/s optical (1000BASE-X / 1000BASE-SX) |
| Supported Standards: | 802.3 / 802.3ab / 802.3z / 802.3x / 802.1Q |
| Supported Cable: | Multimode fiber (62.5/125 µm, 50/125 µm, 850 nm) or single-mode fiber (9 µm, 1310 nm) |
| Bracket: | Metal bracket: Full height / Low profile |
| PCB Size (mm): | Approx. 135 × 65 mm |
| Weight (G.W): | |
| Power Consumption: | Approx. 1.5 W |
| Temperature: | Operating 0°C ~ 70°C ; Storage -40°C ~ 85°C |
| Key Features | |
| Packet Buffer and Queues: ? | 64 KB configurable Tx + Rx FIFO; independent Tx/Rx queues + pipelined DMA + 128-bit internal bus |
| Checksum Offload: ? | Transmit and receive IPv4 / TCP / UDP checksum offload |
| TCP Segmentation Offload (TSO): ? | Supports TCP Segmentation Offload (TSO) |
| Jumbo Frames: ? | Programmable receive buffer (256 B ~ 16 KB); jumbo-frame (MTU) support depends on driver |
| Interrupt and Descriptor Prefetch: ? | Interrupt moderation + up to 64 descriptors prefetched per burst + optimized descriptor fetch/write-back |
| VLAN and Flow Control: ? | 802.1Q VLAN (up to 4096, insert/strip/filter) + 802.3x flow control (programmable pause time) + advanced packet filtering |
| Intel PROSet Software | |
| Intel PROSet: | Adapter diagnostics, advanced configuration, VLAN and Teaming (specific features depend on driver / Windows version) |
| Operating Systems Support | |
| Operating system support | Windows 7 / 8 / 8.1 / 10 / 11 Windows Server 2008 / 2008 R2 / 2012 / 2012 R2 Linux (Intel e1000 base driver, 2.4.x / 2.6.x kernels) FreeBSD / VMware ESXi / NetBSD / Unix |