Winyao

Winyao 8111-mPCIe-C Network Atapter

Winyao 8111-mPCIe-C adapter is based on the Realtek RTL8111F Ethernet controller and features a Mini-PCIe design with onboard one RJ45 ports. All ports support auto-negotiation 10/100/1000Mbps speeds and deliver full line-rate Gigabit network connectivity.

The adapter is for space-constrained embedded systems, industrial control computers (IPC), fanless industrial motherboards, and edge-computing nodes. It can be used as an onboard network expansion module for industrial PCs, network security appliances, in-vehicle / rail-transit terminals, digital signage, and thin clients, providing stable 10 / 100 / 1000M auto-negotiation wired access. It can also be embedded into industrial automation equipment and machine-vision controllers to connect PLCs, HMIs, industrial cameras, and remote monitoring platforms, meeting the networking requirements of Modbus-TCP, EtherNet/IP, PROFINET, and similar industrial protocols. The miniPCIe interface plugs directly into the miniPCIe expansion slot of mainstream embedded and Compact motherboards without extra cables, and its wide-temperature and low-power characteristics suit unattended industrial deployments.

Common Key Features

  • Realtek RTL8111F Gigabit Ethernet controller
  • miniPCIe interface
  • One RJ45 copper port, supports 10 / 100 / 1000BASE-T, full-duplex and half-duplex
  • Compliant with IEEE 802.3 / 802.3u / 802.3ab; supports IEEE 802.3 auto-negotiation with Next Page capability
  • Supports Jumbo Frames up to 9 KB (9216 bytes)
  • Supports IEEE 802.3x full-duplex flow control, IEEE 802.1Q VLAN tagging, and IEEE 802.1p priority
  • Supports IEEE 802.3az-2010 Energy Efficient Ethernet (EEE) at 10 / 100 / 1000M to reduce power during low-traffic periods
  • Supports power-down / link-down power saving, PHY disable mode, Auto MDI/MDI-X crossover detection, and auto-correction

Performance Features

  • Supports quad-core Receive-Side Scaling (RSS); works with MSI / MSI-X interrupts to improve receive throughput on multi-CPU systems
  • Supports checksum offload (IPv4 / IPv6 / TCP / UDP, transmit and receive) and segmentation task offload (Large Send v1 / v2)
  • Supports protocol offload (ARP / NS proxy offload) to lower host CPU protocol-processing overhead
  • Supports hardware ECC and CRC checking; on-chip transmit/receive buffers help preserve data integrity
  • Compact miniPCIe design with small motherboard footprint, suitable for tight embedded and IPC enclosures
Specification Value
Lifecycle Active
Distributor
Inventory
Yes
Adapter Type OCP 3.0
ASIC BCM57502
Connectors QSFP28
OS Support CentOS, Debian, Microsoft Windows, Oracle Linux, Oracle Solaris, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, Ubuntu, VMware, VMware ESX, VMware vSphere, Windows Hyper-V, Windows Server
Host Connector PCIe 4.0 x16
Link-Speeds 50/40/25/10GbE
Multi-Host Yes
NPAR Yes
Ordering Part # BCM957502-N150G
Ports 1
|
Title OS Operate
{{ item.title }}
{{ item.version ? ('' + item.version) : 'NA' }}{{ item.fileSize || 'NA' }}
{{ item.os }}