Winyao E5709T Dual-Port Server Adapter
Winyao E5709T network card adapter is based on the Broadcom BCM5709C Ethernet controller and features a PCI-E x1 design with onboard two RJ45 ports. All ports support auto-negotiation 10/100/1000Mbps speeds and deliver full line-rate Gigabit network connectivity.
The adapter is for edge computers, industrial automation, and machine vision (industrial camera) scenarios. It is suitable for multi-uplink, link aggregation, and failover of edge computing gateways and edge servers; dual-network isolation and redundant networking of industrial-site PLC/IPC and control networks such as Modbus-TCP, EtherNet/IP, and EtherCAT; and parallel image capture and visual inspection of multiple GigE Vision industrial cameras. The on-chip TCP processing engine and iSCSI offload significantly reduce host CPU utilization, providing high-throughput, low-latency Gigabit connectivity for industrial PCs, embedded platforms, and servers.
Key Common Features
- Uses the Broadcom NetXtreme II BCM5709C converged network controller
- Dual-port single-chip solution, suitable for Network Interface Card (NIC) and LAN-on-Motherboard (LOM) designs
- PCI Express x1 interface, compatible with PCIe v2.0
- 2 RJ45 copper ports
- Supports 10/100/1000 Mb/s auto-negotiation
- Dual-port Gigabit TOE (TCP/IP Offload Engine) solution with integrated TCP processing engine
- Integrated iSCSI controller (iSCSI initiator) and RDMA controller (RNIC, supports iWARP / RDMAC 1.0); can run RDMA, iSCSI HBA, and TOE concurrently
- Supports 9 KB jumbo frames
- Supports IEEE 802.3x flow control and IEEE 802.1Q VLAN tagging
- Supports NIC teaming for link aggregation, load balancing, and failover: 802.3ad LACP, Generic Trunking (GEC / FEC), and heterogeneous teaming
- Supports NC-SI (Network Controller Sideband Interface) and IPMI management pass-through
- Supports PXE 2.0 remote boot, iSCSI boot, and Wake-on-LAN
- Supports statistics gathering (SNMP MIB II, Ethernet-like MIB, 802.3x Clause 30 MIB) and JTAG boundary scan
Performance Features
- Compliant with IEEE 802.3 / 802.3u / 802.3ab and supports auto-negotiation
- TCP processing engine supports full fast-path TCP processing, compatible with IPv4 and IPv6; both ports support TOE
- Supports Receive Side Scaling (RSS) to distribute packet receive processing across multiple processor cores
- Supports TCP / IP checksum offload and TCP Segmentation Offload (TSO)
- Supports RDMA hardware-based data placement directly into application buffers without CPU intervention (user mode and kernel mode)
- Accelerates IP storage: reduces CPU utilization for file-level storage protocols such as CIFS and NFS
- Supports adaptive interrupts to reduce system overhead for network processing
- Supports Message Signaled Interrupts (MSI) and MSI-X, allowing interrupt distribution in multi-CPU hosts
- PCI Express host interface provides low-latency access to CPU and memory resources
- Supports interrupt coalescing
| Product Overview | |
| Main Controller: | Broadcom BCM5709C |
| Bus Interface: | PCI Express v2.0 x1 |
| Ports: | RJ45 × 2 |
| Speed: | 10/100/1000 Mb/s Auto-Negotiation |
| Supported Standards: | IEEE 802.3 / 802.3u / 802.3ab / 802.3x / 802.3ad / 802.1Q / 802.3 Auto |
| Supported Cable: | 1000BASE-T: Cat5e or higher |
| Bracket: | Metal bracket: Full height / Low profile |
| PCB Size (mm): | Approx. 115 * 69 mm |
| Weight (G.W): | Approx. 80g |
| Power Consumption: | Approx. 3.0W |
| Temperature: | Operating 0°C ~ 70°C / Storage -40°C ~ +85°C |
| Key Features | |
| TCP/IP Offload Engine (TOE): ? | Hardware-level full TCP/IP offload (IPv4/IPv6), supported on Windows + SNP, greatly reduces CPU utilization |
| Checksum Offload: ? | TCP/IP/UDP checksum offload + SCTP checksum offload |
| Jumbo Frame: ? | Supports 9 KB Jumbo Frame |
| Interrupts and Multi-Core Scaling: ? | MSI-X + RSS multi-core load balancing; adaptive interrupts + interrupt coalescing |
| TCP Segmentation Offload (TSO): ? | TCP/UDP TSO + TSO interleaving |
| iSCSI / RDMA: ? | Hardware iSCSI HBA (license required) + RDMA/RNIC (iWARP) + TOE combined |
| VLAN and Flow Control: ? | 802.1Q VLAN + 802.1p QoS + 802.3x flow control + SNMP statistics |
| Link Aggregation and Redundancy: ? | 802.3ad LACP + Teaming/Failover + Smart Load Balancing |
| Management Features: ? | NC-SI + SMBus + IPMI pass-through + ASF + ACPI 1.1a |
| Wake and Boot: ? | Wake on LAN + PXE 2.0 remote boot + ACPI power management |
| Broadcom Advanced Control Suite (BACS) Software | |
| BACS 3 Management Software: | Adapter diagnostics, VLAN and Teaming/Failover, link aggregation configuration |
| Operating Systems Support | |
| Operating system support | Windows Server 2003/2008/2008 R2/2012/2012 R2 (TOE on Windows Server family only) Windows 7/8/8.1/10 (32/64bit) Linux FreeBSD & VMware ESX/ESXi |