Winyao E5720T2 Dual-Port Server Adapter
Winyao E5720T2 network card adapter is based on the Broadcom BCM5720 Ethernet controller and features a PCI-E x1 design with onboard two RJ45 ports. All ports support auto-negotiation 10/100/1000Mbps speeds and deliver full line-rate Gigabit network connectivity.
The adapter is for edge computers, industrial automation, and machine vision (industrial camera) scenarios. It is suitable for multi-uplink, link aggregation, and failover of edge computing gateways and edge servers; dual-network isolation and redundant networking of industrial-site PLC/IPC and control networks such as Modbus-TCP, EtherNet/IP, and EtherCAT; and parallel image capture and visual inspection of multiple GigE Vision industrial cameras. IEEE 1588 hardware timestamping ensures precise synchronization across multiple devices, while Energy Efficient Ethernet (EEE) and the on-chip switching regulator controller reduce system power consumption, providing high-reliability, low-power Gigabit connectivity for industrial PCs and embedded platforms.
Key Common Features
- Uses the Broadcom BCM5720 Gigabit Ethernet controller
- PCI Express x1 (5 GT/s)
- The controller provides 2 RJ45 copper ports
- Supports 10/100/1000 Mb/s full duplex and half duplex, with automatic MDI crossover
- Supports IEEE 802.3ap Clause 73 auto-negotiation and IEEE 802.3x flow control
- Supports jumbo frames with a maximum payload of 9600 bytes
- Supports IEEE 802.1Q VLAN tagging and link aggregation (802.3ad / 802.1AX) load balancing
- Supports IEEE 1588 and IEEE 802.1AS time synchronization hardware assist (high-precision clock, transmit/receive timestamp registers)
- Supports IEEE 802.3az-2010 Energy Efficient Ethernet (EEE), Central Power Management Unit (CPMU), and power management offload
- Supports NC-SI (Network Controller Sideband Interface) and Host-to-BMC (H2B) pass-through for improved system manageability
- Supports Wake-on-LAN, PXE remote boot, and iSCSI remote boot
- Supports statistics for SNMP MIB II, Ethernet-like MIB, and Ethernet MIB (IEEE 802.3z Clause 30)
Performance Features
- 17 receive queues and 16 transmit queues per port; supports I/O Virtualization (IOV)
- Supports VMware NetQueue and Microsoft VMQ virtual machine queue technologies
- Supports Receive Side Scaling (RSS), including UDP RSS hash types, to distribute data flows across multiple processor cores
- Supports Transmit Side Scaling (TSS) and multiple transmit queues to improve multi-core system throughput
- Supports MSI and MSI-X message signaled interrupts; up to 17 MSI-X vectors with flexible association between vectors and transmit/receive queues
- Supports TCP / IP / UDP checksum offload (IPv4 / IPv6)
- Supports Large Send Offload (LSO) and TCP Segmentation Offload (TSO)
- Each LAN interface independently occupies one PCI Express function and supports Function Level Reset (FLR)
- Supports TLP Processing Hint (TPH) and PCIe CLKREQ to reduce access latency and power consumption
| Product Overview | |
| Main Controller: | Broadcom BCM5720 |
| Bus Interface: | PCI Express v2.1 (5.0 GT/s) x1 |
| Ports: | RJ45 × 2 |
| Speed: | 10/100/1000 Mb/s Auto-Negotiation |
| Supported Standards: | IEEE 802.3 / 802.3u / 802.3ab / 802.3x / 802.1Q / 802.1AX / 802.3ap / 802.3az / 802.3 Auto |
| Supported Cable: | 1000BASE-T: Cat5e or higher |
| Bracket: | Metal bracket: Full height / Low profile |
| PCB Size (mm): | Approx. 76 * 69 mm |
| Weight (G.W): | Approx. 80g |
| Power Consumption: | Approx. 3.6W |
| Temperature: | Operating 0°C ~ 55°C / Storage -40°C ~ +85°C |
| Key Features | |
| Packet Buffers and Queues: ? | 17 Rx + 16 Tx queues per port; 17 MSI-X vectors with flexible queue-vector binding |
| Checksum Offload: ? | IPv4 / IPv6 TCP / UDP checksum offload |
| Jumbo Frame: ? | Supports 9600-byte Jumbo Frame |
| Interrupts and Multi-Core Scaling: ? | MSI-X + RSS (with UDP hash) + TSS; multi-queue and programmable interrupt coalescing |
| TCP Segmentation Offload (TSO): ? | Supports Large Send Offload (LSO / TSO) |
| Precision Time Synchronization: ? | Supports IEEE 1588v2 (PTP) and IEEE 802.1AS timestamping |
| VLAN and Flow Control: ? | VLAN filter/tag + 802.1AX LACP + 802.3x flow control + QoS / multicast and broadcast filtering |
| Virtualization: ? | Independent PCIe Function per port + VMware NetQueue + Microsoft VMQ (not SR-IOV) |
| Management Features: ? | NC-SI v1.1 + SMBus 2.0 + TruManage + SNMP MIB statistics monitoring |
| Wake and Boot: ? | Wake on LAN + PXE (BIOS / UEFI) remote boot + iSCSI Boot + ACPI power management |
| Energy Efficiency: ? | Supports 802.3az EEE + ACPI / CLKREQ / PM Offload power saving |
| Broadcom Advanced Control Suite (BACS) Software | |
| BACS 3 Management Software: | Adapter diagnostics, advanced configuration, VLAN and Teaming |
| Operating Systems Support | |
| Operating system support | Windows 11 / 10 / 8 / 7 / XP (32/64Bit) Windows Server 2012 / 2012 R2 / 2016 / 2019 / 2022 Linux ( tg3 in-kernel driver; RHEL / CentOS / SLES / Ubuntu / Debian etc.)VMware ESXi / ESX, Citrix XenServer, Oracle Solaris, FreeBSD |