Winyao

Winyao WY5719T4 Quad-Port Server Adapter

Winyao WY5719T4 network card adapter is based on the Broadcom BCM5719 Ethernet controller and features a PCI-E x4 design with onboard four RJ45 ports. All ports support auto-negotiation 10/100/1000Mbps speeds and deliver full line-rate Gigabit network connectivity.

Winyao WY5719T4 PCIe Quad-Port Gigabit Network Adapter

The adapter is for edge computers, industrial automation, and machine vision (industrial camera) scenarios. It is suitable for multi-uplink, link aggregation, and failover of edge computing gateways and edge servers; multi-network isolation and redundant networking of industrial-site PLC/IPC and control networks such as Modbus-TCP, EtherNet/IP, and EtherCAT; and parallel image capture and visual inspection of multiple GigE Vision industrial cameras. The quad-port card enables high-density networking in one slot, IEEE 1588 hardware timestamping ensures precise synchronization across multiple devices, Energy Efficient Ethernet (EEE) and the on-chip switching regulator controller reduce system power consumption, and the adapter provides high-reliability, low-power Gigabit connectivity for industrial PCs and embedded platforms.

Key Common Features

  • Uses the Broadcom BCM5719 Gigabit Ethernet controller
  • PCI Express x4 (5 GT/s)
  • Provides 4 RJ45 copper ports
  • Supports 10/100/1000 Mb/s full duplex and half duplex, with automatic MDI crossover
  • Supports IEEE 802.3ap Clause 73 auto-negotiation and IEEE 802.3x flow control
  • Supports jumbo frames with a maximum payload of 9600 bytes
  • Supports IEEE 802.1Q VLAN tagging and link aggregation (802.3ad / 802.1AX) load balancing
  • Supports hardware assist for IEEE 1588 and IEEE 802.1AS time synchronization
  • Supports IEEE 802.3az-2010 Energy Efficient Ethernet (EEE), Central Power Management Unit (CPMU), power management offload, and ACPI power management
  • Supports NC-SI (Network Controller Sideband Interface); integrates on-chip packet buffer memory
  • Supports Wake-on-LAN, PXE remote boot, and iSCSI remote boot
  • Supports statistics for SNMP MIB II, Ethernet-like MIB, and Ethernet MIB (IEEE 802.3z Clause 30)

Performance Features

  • Compliant with IEEE 802.3 / 802.3u / 802.3ab; all four ports support full line-rate forwarding
  • 17 receive queues and 16 transmit queues per port; supports I/O Virtualization (IOV)
  • Supports VMware NetQueue and Microsoft VMQ virtual machine queue technologies
  • Supports Receive Side Scaling (RSS), including UDP RSS hash types, to distribute data flows across multiple processor cores
  • Supports Transmit Side Scaling (TSS) and multiple transmit queues to improve multi-core system throughput
  • Supports MSI and MSI-X message signaled interrupts; up to 17 MSI-X vectors, with flexible per-queue interrupt reporting and queue-to-vector association
  • Supports TCP / IP / UDP checksum offload (IPv4 / IPv6)
  • Supports Large Send Offload (LSO) and TCP Segmentation Offload (TSO)
Product Overview
Main Controller: Broadcom BCM5719A1
Bus Interface: PCI Express v2.1 (5.0 GT/s) x4
Ports: RJ45 × 4
Speed: 10/100/1000 Mb/s Auto-Negotiation
Supported Standards: IEEE 802.3 / 802.3u / 802.3ab / 802.3ap / 802.3x / 802.1Q / 802.3az / 802.3 Auto
Supported Cable:1000BASE-T: Cat5e or higher
Bracket: Metal bracket: Full height / Low profile
PCB Size (mm): Approx. 119 * 69 mm
Weight (G.W): Approx. 95g
Power Consumption: Approx. 5.78W
Temperature: Operating 0°C ~ 55°C / Storage -40°C ~ +85°C
Key Features
Packet Buffers and Queues: ?17 Rx + 16 Tx queues per port; 17 MSI-X vectors with flexible vector-to-queue association
Checksum Offload: ?TCP / IP / UDP checksum offload (IPv4 and IPv6)
Jumbo Frame: ?Supports jumbo frames up to 9600 bytes
Interrupts and Multi-Core Scaling: ?MSI-X + RSS / TSS; UDP RSS hash, multi-core load balancing
TCP Segmentation Offload (TSO): ?Supports LSO / TSO (TCP segmentation offload)
Time Synchronization: ?Hardware-assisted IEEE 1588v2 and IEEE 802.1AS time synchronization
VLAN and Flow Control: ?VLAN tagging + 802.3x flow control + 802.3ad/802.1AX link aggregation + Auto MDI-X
I/O Virtualization: ?Independent PCIe Function per port; VMware NetQueue + Microsoft VMQ
Management Features: ?NC-SI + SMBus 2.0 + TruManage; SNMP statistics, IPMI out-of-band management
Power Saving and Remote Boot: ?EEE (802.3az) + ACPI power saving; WoL + PXE (BIOS/UEFI) + iSCSI Boot
Broadcom Advanced Control Suite (BACS) Software
Broadcom BACS Management Suite: Diagnostics, advanced configuration, VLAN, Teaming (requires BACS/ANS), WMI and BBMAPI management
Operating Systems Support
Operating system supportWindows Server 2008 R2 / 2012 / 2012 R2 / 2016 / 2019 / 2022
Windows 7/8/8.1/10/11 (32/64bit)
Linux (tg3 / in-kernel support; RHEL / CentOS / SLES / Ubuntu / Debian etc.)
VMware ESXi / ESX, Citrix XenServer, Oracle Solaris, FreeBSD
|
Title OS Operate
{{ item.title }}
{{ item.version ? ('' + item.version) : 'NA' }}{{ item.fileSize || 'NA' }}
{{ item.os }}