Winyao

Winyao WYX550-T2 Dual-Port Server Adapter

Winyao WYX550-T2 network card adapter is based on the Intel X550AT2 Ethernet controller and features a PCI-E x4 design with onboard two RJ45 ports. All ports support auto-negotiation 10GbE/5GbE/2.5GbE/1GbE/100Mb speeds and deliver full line-rate 10GbE network connectivity.

Winyao WYX550T2 PCIe Dual-Port 10GbE Network Adapter

This adapter is for edge computers, industrial automation, and machine vision (industrial camera) scenarios. It is suitable for high-bandwidth uplink, link aggregation, and failover switching on edge computing servers and edge nodes; backbone interconnection for industrial-field PLC/IPC and control networks such as Modbus-TCP and EtherNet/IP; and parallel image capture and visual inspection with multiple high-resolution, high-frame-rate GigE Vision industrial cameras. Bandwidth 10 times that of Gigabit easily carries multiple streams of uncompressed HD vision data and large-scale point clouds, and it natively supports NBASE-T (2.5 / 5GbE) technology so it can be deployed on existing CAT5e / CAT6 cabling. Combined with FCoE / iSCSI / NFS unified network capability and comprehensive I/O virtualization features, it is suitable for building a high-performance, virtualizable network foundation on industrial-control servers and embedded platforms.

Common Key Features

  • Uses Intel Ethernet Controller X550-AT2
  • PCI Express v3.0 x4 (8.0 GT/s)
  • Integrates dual-port 10GBASE-T MAC and PHY (copper) on-chip, providing 2 RJ45 copper ports
  • Supports 10GbE / 5GbE / 2.5GbE / 1GbE / 100Mb rates, full duplex
  • Compliant with IEEE 802.3an / 802.3bz / 802.3ab / 802.3u / 802.3 specifications; supports auto-negotiation and automatic MDI/MDI-X
  • Supports jumbo frames up to 15.5 KB
  • Supports IEEE 802.3x flow control (send/receive pause frames and receive FIFO thresholds are configurable), IEEE 802.3ad link aggregation, and NIC teaming
  • Supports IEEE 802.1Q VLAN (including IEEE 802.1ad double VLAN) and IEEE 802.1p priority, up to 4096 VLAN tags
  • Supports Data Center Bridging (DCB): IEEE 802.1Qaz ETS and IEEE 802.1Qbb PFC (up to 8 priorities)
  • Supports storage over Ethernet such as FCoE / iSCSI / NFS and FCoE / iSCSI boot; supports SNMP / RMON / LLDP / DCBX management
  • Supports IEEE 1588 precision time synchronization and IEEE 802.1AS time synchronization (Linux environment only)
  • Supports NC-SI sideband management interface and SMBus communication with an external Manageability Controller (MC); supports IPMI pass-through
  • Supports Wake-on-LAN, IPv6 wake filters, configurable flexible filters (configured via NVM), and PXE remote boot

Performance Features

  • 128 transmit queues and 128 receive queues per port; queues can be dynamically enabled or disabled
  • Supports Receive Side Scaling (RSS), Receive Side Coalescing (RSC), and Intel Ethernet Flow Director (16×8 and 32×4 modes)
  • Supports MSI and MSI-X message signaled interrupts, interrupt throttling control, dynamic interrupt moderation, and low-latency interrupts
  • Supports IPv4 / IPv6 and TCP / UDP checksum offload (Tx/Rx), TCP Segmentation Offload (TSO, up to 256 KB), and fragmented UDP checksum offload
  • Supports Intel Data Direct I/O (DDIO), Direct Cache Access (DCA), No Snoop / Relaxed Ordering, and DMA Coalescing
  • Supports VMDq / next-generation VMDq (64 queues per port, 64 VMs × 2 queues); compatible with VMware NetQueue and Microsoft VMQ
  • Supports PCI-SIG SR-IOV and Flexible Port Partitioning (FPP, up to 64 virtual functions per port); supports independent Function Level Reset (FLR)
  • Supports stateless network virtualization offloads for VxLAN and NVGRE, VEPA (802.1Qbg), and VEB virtual Ethernet bridging
  • Supports on-chip QoS and traffic management, per-traffic-class transmit rate limiting, multicast/broadcast replication, and inter-VM loopback forwarding
  • 160 KB programmable transmit buffer and 384 KB programmable receive buffer per port; transmit/receive descriptor rings are managed by hardware
  • Supports FCoE CRC offload, FCoE direct data placement, receive packet header split, and header replication
Product Overview
Main Controller: Intel X550-AT2
Bus Interface: PCI Express v3.0 (8.0 GT/s) x4
Ports: RJ45 × 2
Speed: 10GbE / 5GbE / 2.5GbE / 1GbE / 100Mb Auto-Negotiation
Supported Standards: 802.3an / 802.3ab / 802.3u / 802.3bz / 802.3x / 802.3az / 802.1Q / 802.1ad / 802.1Qbg / 802.3 Auto
Supported Cable: 10GBASE-T: Cat6A; 1000BASE-T / 2500BASE-T: Cat5e or higher
Bracket: Metal bracket: Full height / Low profile
PCB Size (mm): Approx. 150 × 69 mm
Weight (G.W): Approx. 145g
Power Consumption: Approx. 11W
Temperature: Operating 0°C ~ 70°C / Storage -40°C ~ 85°C
Key Features
Queues and Multi-Core Scaling: ?128 Tx + 128 Rx queues per port; MSI-X (up to 64 vectors/port) + RSS (up to 32 flows/port)
Checksum Offload: ?IPv4 / IPv6 + TCP / UDP checksum offload
Jumbo Frame: ?Supports Jumbo Frames up to 15.5 KB
Segmentation Offload: ?TSO (IPv4 / IPv6) + RSC / LRO + Large FC Receive
Flow Director and Filtering: ?Intel Flow Director + L3/L4 5-tuple / TCP SYN filtering + Packet Split / Header Replication
Network Virtualization Offload: ?VXLAN / NVGRE stateless offload (overlay networks)
VLAN and Flow Control: ?802.1Q VLAN + 802.1ad Q-in-Q + 802.3x flow control + IEEE 1588 / 802.1AS per-packet timestamping
Virtualization (VT-c): ?VMDq + SR-IOV (64 VF/port) + FPP + Tx rate limiting + in-controller QoS
Ethernet Storage: ?iSCSI + FCoE + NFS + Intel DDIO
Management and Power: ?NC-SI + IPMI pass-through + SMBus + 802.3az EEE + DMA Coalescing (passive cooling)
Wake on LAN and Boot: ? PXE Remote Boot + iSCSI Boot (Legacy & UEFI)
Intel PROSet Software
Intel PROSet: Adapter diagnostics, advanced configuration, VLAN and Teaming
Operating Systems Support
Operating system support Windows 11 / 10 / 8 / 7 (32/64-bit)
Windows Server 2016 / 2019 / 2022 / 2025 (64-bit)
Linux
FreeBSD 13.5 / 14.3 / 15.0
VMware vSphere ESXi 8.0 / 9.0
UEFI 2.8 / 2.9 / 2.10
|
Title OS Operate
{{ item.title }}
{{ item.version ? ('' + item.version) : 'NA' }}{{ item.fileSize || 'NA' }}
{{ item.os }}