Winyao WY8111T4-POE Quad-Port Server Adapter
Winyao WY8111T4-POE network card adapter is based on the Realtek RTL8111F Ethernet controller and features a PCI-E x4 design with onboard four RJ45 ports(POE+ power supply). All ports support auto-negotiation 10/100/1000Mbps speeds and deliver full line-rate Gigabit network connectivity.
The adapter is for Built for IP cameras, IP phones, wireless access points, building intercom systems, NVR/NAS systems, industrial, it uses a PCI Express interface with the Realtek RTL8111F Gigabit controller and adds an external IEEE 802.3af / 802.3at PoE+ power-sourcing module. The NIC provides 10/100/1000 Mbps RJ45 connectivity.
Key Features
- Realtek RTL8111F Gigabit Ethernet controller
- PCI Express 1.1 x1 interface, 2.5 GT/s
- Card-level PoE+ module compliant with IEEE 802.3af / IEEE 802.3at (PSE side)
- RJ45 MAC/PHY for 10/100/1000 Mbps copper connection
- 1000BASE-T over Cat 5e/6 up to 100 m
- Supports MDI / MDI-X auto-crossover and pair swap / polarity / skew correction
- Supports Jumbo Frames up to 9 KB
- Supports Wake-on-LAN (WoL), AMD Magic Packet and Microsoft Wake-up Frame
- Supports PCI MSI and MSI-X message-signaled interrupts
Performance Features
- Compliant with IEEE 802.3 / 802.3u / 802.3ab
- Supports IEEE 802.1Q VLAN tagging and IEEE 802.1P Layer 2 priority encoding
- Supports IEEE 802.3x full-duplex flow control
- Supports IEEE 802.3az-2010 Energy Efficient Ethernet (EEE)
- Microsoft NDIS5 / NDIS6 checksum offload for IPv4 / IPv6 / TCP / UDP
- Large Send v1 and Giant Send v2 segmentation offload
- Receive-Side Scaling (RSS) to spread receive processing across CPUs
- Protocol offload for ARP (IPv4) and Neighbor Solicitation (IPv6) while the host sleeps
| Product Overview | |
| Main Controller: | Realtek RTL8111F |
| Bus Interface: | PCI Express v1.1 (2.5 GT/s) x1 |
| Ports: | RJ45 × 4 (each port supports PoE+ power sourcing) |
| Speed: | 10/100/1000 Mb/s auto-negotiation |
| Supported Standards: | 802.3u / 802.3ab / 802.3x / 802.1Q / 802.1P / 802.3az-2010 / 802.3 Auto |
| Supported Cable: | 1000BASE-T: Cat5 or above |
| Bracket: | Metal bracket: Full height / Low profile |
| PCB Size (mm): | Approx. 130 × 105 mm |
| Weight (G.W): | |
| Power Consumption: | Adapter approx. 4.5 W; PoE+ power up to 25.5 W per port (802.3at) / 15.4 W (802.3af) |
| Temperature: | Operating 0°C ~ 70°C / Storage -40°C ~ +85°C |
| Key Features | |
| Checksum Offload: ? | NDIS5/NDIS6: IPv4 / IPv6 / TCP / UDP checksum offload |
| Segmentation Offload (TSO): ? | Large Send v1 + v2 (Giant Send) segmentation offload |
| Jumbo Frames: ? | Supports Jumbo Frames up to 9K bytes |
| Multi-Core Scaling (RSS): ? | Quad-core RSS + MSI / MSI-X interrupts |
| VLAN and Flow Control: ? | 802.1Q VLAN + 802.1P priority + 802.3x full-duplex flow control |
| Energy Efficient Ethernet (EEE): ? | IEEE 802.3az-2010 EEE (10/100/1000 Mbps supported) |
| Power and Sleep Proxy: ? | ACPI/APM + PCI PM 1.1 + Protocol Offload (ARP & NS) + EMAC-393 / ECMA ProxZzzy |
| Integrated PHY and Pair Correction: ? | Auto-crossover + polarity/pair correction + DSP equalization / crosstalk / echo cancellation |
| Storage and Reliability: ? | On-chip Tx/Rx buffers + hardware ECC/CRC |
| Wake on LAN and Boot: ? | Wake on LAN (Magic Packet) + PXE remote boot (iSCSI Boot not supported) |
| PoE Power Sourcing: ? | Quad-port PoE+; compliant with 802.3af / 802.3at |
| Realtek Ethernet Diagnostic Utility | |
| Realtek Management Software: | Ethernet Diagnostic Utility + DASH all-in-one Installer / Dash In-Band Config |
| Operating Systems Support | |
| Operating system support | Windows 11 / 10 / 8 / 7 / XP Windows Server 2022 / 2025 / 2012 / 2008 / 2003 Linux FreeBSD / SCO Unix / Novell NetWare Mac OS X 10.7 (Intel platform) |