Winyao

Winyao WYI226T4-POE Quad-Port Server Adapter

Winyao WYI226T4-POE network card adapter is based on the Intel I226V Ethernet controller and features a PCI-E x4 design with onboard four RJ45 ports(POE+ power supply). All ports support auto-negotiation 2.5GbE/1GbE/100Mb speeds and deliver full line-rate 2.5GbE network connectivity.

The adapter is for Built for IP cameras, wireless APs, IP phones, building intercom systems, NVR/NAS systems, industrial gateways, and embedded "data + power over one cable" platforms, the card uses four Intel I226-V 2.5GbE controllers with a PCI Express x4 host interface and adds an external IEEE 802.3af / 802.3at PoE+ power-sourcing module. Each RJ45 port provides 10/100/1000/2500 Mbps connectivity while the external PSE supplies powered devices through the same cable. Note: Intel I226-V itself is a 2.5GbE MAC/PHY controller, not a PoE controller.

Key Features

  • Four Intel Ethernet Controller I226-V devices (each single 2.5GbE)
  • Host bus: PCI Express 2.0 x4 (5.0 GT/s)
  • Card-level PoE+ module compliant with IEEE 802.3af / IEEE 802.3at (PSE side)
  • Quad RJ45 port with integrated 2.5G Base-T MAC/PHY; supports NBASE-T / 802.3bz
  • Supports 10 / 100 / 1000 / 2500 Mbps auto-negotiation per IEEE 802.3
  • Supports MDI / MDI-X auto-crossover and MDI lane swap
  • Hardware packet-buffer integrity features; checksum offload and CRC handling in hardware
  • Supports Wake-on-LAN (WoL), APM/ACPI wake, and ECMA-393 proxy offload
  • Supports Jumbo Frames (Intel spec: up to 9 KB; some card vendors state 9.5 KB)

Performance Features

  • Compliant with IEEE 802.3 / 802.3u / 802.3ab / 802.3bz
  • Supports IEEE 802.1Q VLAN tagging and IEEE 802.1p priority
  • Supports IEEE 802.3x full-duplex flow control and IEEE 802.3ad link aggregation
  • Supports IEEE 802.3az Energy Efficient Ethernet (EEE)
  • Supports IEEE 1588 and 802.1AS time synchronization (capability varies by SKU/OS driver)
  • I226-V supports 802.1Qav / 802.1Qbv TSN-class features; full 802.1AS-rev/TSN set is officially emphasized on I226-LM/IT
  • TCP / UDP checksum offload for IPv4 and IPv6; TSO for IPv4/IPv6
  • SCTP checksum offload supported by the I225/I226 feature set
  • 4 transmit queues and 4 receive queues per controller; supports RSS and MSI-X interrupts
Product Overview
Main Controller: Intel I226-V
Bus Interface: PCI Express v2.1 (5 GT/s) x4
Ports: RJ45 × 4 (each port supports PoE+ power sourcing)
Speed: 10/100/1000/2500 Mb/s auto-negotiation
Supported Standards: IEEE 802.3 / 802.3u / 802.3ab / 802.3bz / 802.3x / 802.1Q / 802.3az / 802.3 Auto
Supported Cable:Cat5 or above; 1000BASE-T / 2500BASE-T
Bracket: Metal bracket: Full height / Low profile
PCB Size (mm): Approx. 130 × 105 mm
Weight (G.W):  
Power Consumption: Adapter approx. 5.3 W; PoE+ power up to 25.5 W per port (802.3at) / 15.4 W (802.3af)
Temperature:Operating 0°C ~ 55°C / Storage -40°C ~ +85°C
Key Features
Packet Buffers and Queues: ?4 Tx + 4 Rx queues; ECC packet buffer; DMA and descriptor-ring management, interrupt coalescing
Checksum Offload: ?IPv4/IPv6 TCP/UDP checksum offload + SCTP integrity offload
Jumbo Frames: ?Supports 9KB Jumbo Frames
Interrupt and Multi-Core Scaling: ?MSI-X + RSS; multi-queue + interrupt moderation, multi-core load balancing
TCP Segmentation Offload (TSO): ?TCP/UDP TSO v2 (up to 256KB) + extended Tx descriptors
VLAN and Flow Control: ?VLAN filtering/tagging + 802.1p QoS + 802.3x flow control + Auto MDI/MDI-X
Time-Sensitive Networking (TSN): ?TSN (802.1Qav/Qbv/Qbu, 802.3br) + 1588/802.1AS (Linux only)
PoE Power Sourcing: ? Quad-port PoE+; compliant with 802.3af / 802.3at
Intel PROSet Software
Intel PROSet: Adapter diagnostics and advanced configuration
Operating Systems Support
Operating system supportWindows 10 / 11
Linux (igc native driver, kernel 5.10+, e.g. Ubuntu 22.04, RHEL 8.x)
FreeBSD (igc driver) / VMware ESXi (built-in igc driver)
|
Title OS Operate
{{ item.title }}
{{ item.version ? ('' + item.version) : 'NA' }}{{ item.fileSize || 'NA' }}
{{ item.os }}