Winyao

Winyao WY6105FX Network Atapter

Winyao WY6105FX network card adapter is based on the VIA VT6105 Ethernet controller and features a PCI 32Bit design with onboard one SC interface. All ports support 100Mbps speeds and deliver full line-rate 100FX network connectivity.

VIA VT6105M 100BASE-FX NIC

The adapter is for traditional industrial remote device sites such as PLC locations, VFD drives, serial-to-Ethernet gateways, and remote RTU nodes, where copper cabling cannot meet the distance requirement, this 100M optical link provides a stable and reliable connection instead of copper media.

Key Features

  • VIA VT6105M Chipset
  • Standard 32-bit PCI 2.2 interface
  • SC 100BASE-FX optical interface
  • Optional transceiver modules: 2 km multimode version and 20 km single-mode version
  • Provides 12 MIB link-status counters per port
  • Supports EEPROM for MAC address storage

Standards & Features

  • Efficient PCI bus mastering through VIA Rhine CSR definition
  • Supports priority queuing with up to 8 priority levels
  • Supports TCP / UDP checksum offload to reduce CPU usage
  • Supports physical, broadcast, and multicast address filtering
  • Supports IEEE 802.1Q VLAN; can insert/remove VLAN tags and filter by VLAN ID
  • Supports Wake-on-LAN (WOL) per PCI power-management specification
Product Overview
Main Controller VIA VT6105M
Bus Interface PCI 2.2 32-bit
Ports SC 100BASE-FX
Supported Standards 802.3 / 802.3u /
Supported CableOptical module: 62.5/125 µm or 50/125 µm multimode fiber, 1300 nm
Bracket: Full height / Low profile
PCB Size (mm) Approx. 120 × 53 mm
Weight (G.W)
Power Consumption Approx. 2.3W at 100Mbps link
TemperatureOperating 0°C ~ 50°C / Storage -40°C ~ 80°C
Key Features
Descriptor and DMA Buffers ?Tx/Rx DMA + FIFO buffering reduces CPU load; 8 priority transmit queues; 802.1p
Checksum Offload ? IPv4 IP header checksum offload; TCP/UDP checksum offload
Duplex and Auto-Negotiation ?10/100 Mbps half/full duplex, 802.3u N-Way auto-negotiation, Auto MDI/MDIX
Flow Control ?IEEE 802.3x PAUSE (full duplex) + Jam (half duplex)
Power Management / Wake ?ACPI + PCI PM + WoL (Magic Packet / link change / unicast / MS-defined pattern)
VLAN and Priority ?802.1Q VLAN long frames + tag insert/remove + VLAN ID filter + 802.1p 8 priority queues
Management ?WfM 2.0 + DMI 2.0 + 12 sets of 16-bit hardware MIB counters
Boot / Configuration ?EEPROM / Boot ROM config, RPL + PXE remote boot
SFF Optical Port ?100BASE-FX SC module, Force Fiber Mode, 1300nm multimode fiber
VIA Rhine Management Software
VIA Rhine Software VIA Rhine Family management driver / DIAG utility; Boot ROM configuration, WoL and diagnostic functions
Operating Systems Support
Operating system support MS-DOS
Windows 95/98/Me
Windows NT 4.0 / 2000 / XP / Server 2003
Windows Vista / 7 (32 & 64-bit)
Linux via-rhine / rhinefet kernel 2.2.x / 2.4.x / 2.6.x
FreeBSD vr / NetWare
|
Title OS Operate
{{ item.title }}
{{ item.version ? ('' + item.version) : 'NA' }}{{ item.fileSize || 'NA' }}
{{ item.os }}