Winyao

Winyao WY545DF Network Atapter

Winyao WY545DF network card adapter is based on the Intel 82545 Ethernet controller and features a PCI 32Bit design with onboard one SFP Cage. All ports support 1000Mbps speeds and deliver full line-rate Gigabit network connectivity.

The adapter is for traditional industrial remote device sites such as PLC locations, industrial switches, remote substations, and FTTD fiber-to-the-desk deployments, where copper cabling cannot meet distance requirements, this card uses a stable Gigabit optical link to replace copper media.

Key Features

  • Intel 82545 controller
  • 1000BASE-X SFP optical interface, supports 1000BASE-SX / LX modules
  • SerDes supports 1000BASE-X per IEEE 802.3z, direct connect to SFP
  • 32/64-bit PCI 2.2 / 2.3 and PCI-X 1.0a host interface
  • Supports 64-bit addressing, capable of 4GB memory access
  • Efficient PCI Bus Master, supports client read prefetch up to 64 bytes
  • 64KB transmit/receive FIFO buffer, default 48KB / 16KB

Standards & Features

  • Compliant with IEEE 802.3 / 802.3u / 802.3z / 802.3ab / 802.3x standards
  • Supports IEEE 802.1Q VLAN tagging/untagging/filtering by VLAN ID, 4096 tags
  • Checksum offload for IPv4 TCP/UDP, TCP segmentation (TSO) offload
  • Advanced filtering: 16 perfect match addresses, 4096-bit multicast hash, promiscuous mode
  • 128-bit internal bus transmit arbitration, hardware interrupt mitigation reduces PCI bus utilization
  • Supports SNMP and RMON statistics
  • Supports SMBus sideband interface for IPMI and ASF 1.0 alert
Product Overview
Main Controller: Intel 82545GM
Bus Interface: PCI 2.3 (32/64-bit, 33/66 MHz)
Ports: SFP × 1
Speed: SFP port supports 1000 Mb/s optical (1000BASE-X / 1000BASE-SX)
Supported Standards: 802.3 / 802.3ab / 802.3z / 802.3x / 802.1Q
Supported Cable:Multimode fiber (62.5/125 µm, 50/125 µm, 850 nm) or single-mode fiber (9 µm, 1310 nm)
Bracket: Metal bracket: Full height / Low profile
PCB Size (mm): Approx. 135 × 65 mm
Weight (G.W):  
Power Consumption: Approx. 1.5 W
Temperature: Operating 0°C ~ 70°C ; Storage -40°C ~ 85°C
Key Features
Packet Buffer and Queues: ?64 KB configurable Tx + Rx FIFO; independent Tx/Rx queues + pipelined DMA + 128-bit internal bus
Checksum Offload: ?Transmit and receive IPv4 / TCP / UDP checksum offload
TCP Segmentation Offload (TSO): ?Supports TCP Segmentation Offload (TSO)
Jumbo Frames: ?Programmable receive buffer (256 B ~ 16 KB); jumbo-frame (MTU) support depends on driver
Interrupt and Descriptor Prefetch: ?Interrupt moderation + up to 64 descriptors prefetched per burst + optimized descriptor fetch/write-back
VLAN and Flow Control: ?802.1Q VLAN (up to 4096, insert/strip/filter) + 802.3x flow control (programmable pause time) + advanced packet filtering
Intel PROSet Software
Intel PROSet:Adapter diagnostics, advanced configuration, VLAN and Teaming (specific features depend on driver / Windows version)
Operating Systems Support
Operating system support Windows 7 / 8 / 8.1 / 10 / 11
Windows Server 2008 / 2008 R2 / 2012 / 2012 R2
Linux (Intel e1000 base driver, 2.4.x / 2.6.x kernels)
FreeBSD / VMware ESXi / NetBSD / Unix
|
Title OS Operate
{{ item.title }}
{{ item.version ? ('' + item.version) : 'NA' }}{{ item.fileSize || 'NA' }}
{{ item.os }}