Winyao WY580F2SFP Dual-Port Network Atapter
Winyao WY580F2SFP adapter is based on the Intel 82580 Ethernet controller and features a PCIe X1 design with onboard two SFP Cage. All ports support 1000Mbps speeds and deliver full line-rate Gigabit network connectivity.
The adapter is for Designed for storage servers, enterprise switches, industrial communication platforms, and dual-port backbone communication, it uses a PCI Express x1 interface to provide two Gigabit SFP fiber ports, suitable for enterprise backbone networking, industrial control cabinets, link aggregation/uplinks, and scenarios requiring NC-SI/SMBus management or IEEE 1588 / 802.1AS time synchronization.
Key Features
- Intel 82580DB Gigabit Ethernet controller
- PCI Express 2.0 x1 interface, 5.0 GT/s
- Dual SFP ports supporting 1000BASE-SX / 1000BASE-LX optical modules
- Integrated SerDes also supports 1000BASE-KX / 1000BASE-BX backplane applications
- SGMII interface for SFP or external PHY connections
- NC-SI or SMBus sideband connection to BMC / management controller
Performance Features
- 8 transmit queues and 8 receive queues per port, Receive Side Scaling (RSS), MSI-X interrupt support
- Intel I/O Acceleration Technology v3.0: Header Data Split, Direct Cache Access (DCA), PCIe TLP Processing Hints (TPH)
- IPv4/IPv6 TCP, UDP and IP checksum offload; UDP/TCP Transmit Segmentation Offload (TSO); SCTP receive/transmit checksum offload
- Jumbo Frame support up to 9.5 KB / 9014-byte payload
- IEEE 802.1Q VLAN tagging, IEEE 802.3x flow control, IEEE 802.3ad / 802.1AX LACP
- Intel Virtualization Technology for Connectivity (VT-c) and VMDq, up to 8 virtual machines per port
- IEEE 1588 Precision Time Protocol and IEEE 802.1AS time synchronization with per-packet timestamping
- ACPI and APM power management, DMA Coalescing, PCIe Latency Tolerance Reporting (LTR)
- PXE / UEFI / iSCSI boot, Wake-on-LAN, RMON / SNMP statistics
| Product Overview | |
| Main Controller | Intel 82580DB |
| Bus Interface | PCI Express v2.0 (5.0 GT/s) x1 |
| Ports | SFP × 2 |
| Speed | SFP ports support 1000 Mb/s optical / copper |
| Supported Standards | 802.3z / 802.3ab / 802.3x / 802.1Q |
| Supported Cable | Optical module: 62.5/125 µm or 50/125 µm multimode fiber, 850 nm module; 9 µm single-mode fiber, 1310 nm module |
| Bracket: | Full height / Low profile |
| PCB Size (mm) | Approx. 120 × 69 mm |
| Weight (G.W) | |
| Power Consumption | Approx. 3.3W |
| Temperature | Operating 0°C ~ 55°C ; Storage -40°C ~ 85°C |
| Key Features | |
| Packet Buffers and Queues ? | 8 Rx + 8 Tx queues per port + DMA + 64-bit addressing |
| Checksum Offload ? | IPv4/TCP/UDP/SCTP checksum offload, Tx/Rx |
| Jumbo Frames ? | Supports 9.5 KB jumbo frames |
| Interrupt Extension ? | MSI-X 10 vectors + RSS; 1~8 Rx queues per port + flexible interrupt mapping |
| TCP Segmentation Offload (TSO) ? | Supports TCP Segmentation Offload (TSO) up to 64 KB |
| VLAN and Teaming ? | 802.1Q VLAN + Double VLAN + 802.3ad LACP + 802.1p + multicast/broadcast |
| Virtualization I/O Acceleration ? | Supports VMDq, up to 8 VMs per port + Intel I/OAT v3.0 (Header Split + Direct Cache Access) + PCIe TPH |
| Time Synchronization ? | IEEE 1588 pre-standard + 802.1AS + per-packet timestamping |
| Manageability ? | NC-SI + SMBus + IPMI pass-through + SNMP/RMON + OS2BMC |
| Remote Boot ? | Wake on LAN + PXE + UEFI + iSCSI Boot (Legacy & UEFI) |
| SFP / SerDes Interface ? | 1000BASE-X SerDes; SFP modules / DAC / copper + 1000BASE-KX/BX backplane + SGMII |
| Intel PROSet Software | |
| Intel PROSet | Teaming logic, VLAN and Teaming configuration |
| Operating Systems Support | |
| Operating system support | Windows 7/8/8.1/10/11 Windows Server 2008 R2/2012/2012 R2/2016/2019 Linux (igb driver, kernel 2.6.30+) FreeBSD / VMware ESXi |